Modern electric blankets are a cozy and convenient solution for staying warm on chilly nights. To maintain their longevity and ensure safety, it’s crucial to know how to wash an electric blanket. Regular cleaning not only keeps them fresh but also helps prevent allergens from causing discomfort and unpleasant odors, making your sleep experience even better.
Worried about cleaning your heated blanket with its intricate internal heating elements? Fear not! In this article, we’ve got you covered with essential tips on how to wash an electric blanket. By following the care label instructions and proper cleaning techniques, you can keep your heated blanket clean and cozy without any hassle.
Save $450 On Any Mattress
Plus free shipping
Maintaining a clean electric blanket is essential to prevent the discomfort caused by dirt, dust, and other particles that accumulate over time. To achieve this, follow the manufacturer’s instructions closely. When washing, opt for a gentle cycle with cold water, mixing laundry detergent with warm water for best results. Remember to avoid harsh chemicals and hot water, as well as machine drying. Instead, tumble dry on low heat to ensure the safety of the internal wiring.
With these guidelines in mind, you can effectively wash a heated blanket and maintain it in prime condition, keeping it clean and cozy. This ensures that you enjoy a good night’s sleep night after night.
The durability of your electric blanket depends on it staying dry. When moisture comes into contact with the heating element, it can create a hazardous situation. This combination of water and electricity may lead to electrical shocks or short circuits, potentially causing internal wiring damage in the blanket.
In the event that your electric blanket gets wet, it’s crucial to prioritize safety. First, unplug both the power cord and control cord from the electrical outlets. Then, carefully remove the wet blanket from the bed.
Avoid any contact with the blanket, especially if it’s still plugged in, as this can significantly reduce the risk of electrical shock associated with wet electrical cords.
After removing your wet electric blanket, inspect it carefully for any visible damage, especially checking the electrical wires and heating grid. If you detect any signs of damage or exposed wiring, it’s essential not to use the blanket and dispose of it according to safety guidelines.
However, if there is no visible damage, hang the blanket to air dry in a well-ventilated area, ensuring it’s kept away from any heat sources to facilitate thorough drying.
It’s important to note that even if your electric blanket appears to be functioning normally after getting wet, there may still be underlying damage that could pose a potential hazard. It’s always better to err on the side of caution and replace the blanket.
In summary, electric heated blankets make for a warm and cozy addition to any home, but safeguarding your safety and the longevity of your investment is paramount. Familiarize yourself with the manufacturer’s washing instructions and be prepared to take immediate action if your electric blanket gets wet.
By following the steps mentioned above, you can effectively mitigate potential hazards and continue enjoying the comfort of your electric blanket worry-free.
Regular maintenance is key to ensuring your electric blanket’s performance and longevity. However, when stubborn stains and odors become a concern, a deep clean is essential.
To achieve a successful deep clean, start by checking the blanket’s care label and laundry care symbols for specific instructions, ensuring your blanket remains cozy and fresh. Follow these steps for a successful deep clean of your electric blanket.
Before beginning the deep cleaning process, gather the necessary supplies. This may include a mild laundry detergent, a stain remover, a large basin or bathtub, and a drying rack or clothesline. Make sure to avoid bleach or fabric softener and check the manufacturer’s instructions to ensure the cleaning products are safe for use on the electric blanket.
When opting for a hand wash of your electric blanket, begin by filling a spacious basin or bathtub with cool to warm water and add a small quantity of mild detergent. To ensure an even distribution of soap, gently agitate the water.
Place the outer cover of the blanket in the water and press it down to ensure it’s fully submerged. Allow it to soak for 15-20 minutes.
After soaking, drain the water and gently squeeze the blanket to remove excess water. Avoid wringing or twisting the blanket, as this can damage the heating elements.
Rinse the blanket thoroughly with clean water and gently press again to remove excess water. Repeat the process until all soap residue is removed.
For treating stains, tackle them by applying a stain remover to the affected area. Allow the stain remover to sit for a few minutes before proceeding with the washing process, ensuring effective treatment of stains.
If using a washing machine, set it to a gentle or delicate cycle with cool or lukewarm water. Add a small amount of mild detergent and let the machine fill with water before adding the electric blanket.
Once the wash cycle is complete, run an additional rinse cycle to ensure all soap residue is removed. Again, avoid using hot water or high heat in the dryer to avoid damage to the heating elements.
After washing, it’s important to dry the electric blanket properly to avoid damage to the internal components. Avoid using a dryer or applying direct heat to the blanket.
Instead, air dry the blanket by placing it on a drying rack, shower rod, or clothesline, making sure it’s fully spread out to allow for proper airflow. It may take several hours to dry completely, so be patient.
Once fully dry, inspect the blanket for any damage or wear and tear. If any issues are found, it may be time to consider replacing the electric blanket.
After washing an electric blanket, it’s important to dry it properly to prevent damage to the internal heating elements and ensure safe use of an electric blanket. The following steps will guide you in the proper drying techniques:
Avoid using a dryer or any direct heat source to dry your electric blanket, as this can damage the electrical components and cause it to malfunction. Instead, air-dry and lay flat on a clean surface in a well-ventilated area, away from direct sunlight. You can also hang it on a clothesline, making sure it’s evenly spread out.
During the drying process, flip the electric blanket over every few hours to ensure it dries evenly on both sides. This also promotes airflow, helping it dry faster.
Before storing or using your electric blanket again, make sure it’s completely dry. Check for any moisture by running your hand over the surface, especially around the seams and edges. If it feels damp, continue drying it until it’s completely dry.
Following these tips will help you dry your electric blanket after washing it safely and effectively, ensuring a longer lifespan for your beloved blanket.
If you’re wondering whether it’s safe to dry clean your electric blanket, the short answer is no.
Electric blankets have electrical components that can be easily damaged by the chemicals and heat used in the dry cleaning process. In addition, the solvents used in dry cleaning can damage the insulation on the electric wires, making the blanket a safety hazard.
Instead of dry cleaning, it’s recommended that you opt for alternative cleaning methods, such as machine washing or hand washing. This will not only help keep your electric blanket clean and fresh, but also protect its electrical components and extend its lifespan.
Electric blankets are designed to last for several years, but like all household appliances, they eventually wear out and need to be replaced. Here are some factors to consider when deciding if it’s time to invest in a new electric blanket:
If you notice any frayed or damaged wires in your electric blanket, it’s time for a replacement. These wires can pose a serious safety hazard, increasing the risk of electrical shock or fire.
If your electric blanket is no longer heating evenly or consistently, it may be time for a replacement. This could be a sign of worn-out heating elements, which can affect both the comfort level and energy efficiency of your blanket.
Older electric blankets may not have the same safety features as newer models, such as overheat protection or automatic shut-off functions. If your blanket is several years old, it may be worth upgrading to a newer model for added peace of mind.
Like any bedding item, electric blankets can experience wear and tear over time. If your blanket is starting to look worn, faded, or pilled, it may be time to replace it. A new blanket will not only look and feel better, but it will also be more hygienic.
Overall, it’s important to pay attention to the condition and performance of your electric blanket to ensure your safety and comfort. If you notice any signs of wear or damage, it’s best to err on the side of caution and replace your blanket.
For mattresses:
For pillows:
For sheets:
For blankets and other coverings:
For other bedding items:
If an electric blanket gets wet, it can damage the internal wiring and create a risk of electric shock. Unplug the wet blanket immediately and allow it to dry thoroughly before attempting to use it again. Doing so will prevent any potential hazards and minimize the chances of internal damage.
When you want to deep clean an electric blanket, follow the manufacturer’s instructions carefully. Generally, spot cleaning with a mild detergent and a damp cloth is the safest approach. Avoid immersing the blanket in water or using harsh chemicals, as this can compromise the integrity of the electrical components.
After spot cleaning, it’s important to hang the electric blanket to air dry thoroughly. Avoid using the blanket until it is completely dry, as any residual moisture can damage the internal wiring. Refrain from using a dryer or exposing the blanket to direct heat, as it can pose a safety risk and damage the blanket’s wiring.
We cannot recommend dry cleaning an electric blanket because of the potential risk of damaging the electrical components. Dry cleaning involves the use of chemical solvents that can compromise the internal wiring and pose a safety hazard.
Instead, we suggest referring to the manufacturer’s instructions for specific care recommendations to ensure the blanket’s longevity and safety.
If your electric blanket displays signs of wear and tear, such as frayed fabric, exposed wiring, or inconsistent heating, replacing it is essential. Using a damaged electric blanket can pose a significant hazard to your safety. Fire service experts also advise replacing your electric blanket every 10 years at least.
Electric blankets are a cozy addition that help you stay warm in bed on cold nights, but proper care and timely replacement are essential. Understanding how to wash and dry them safely is crucial for longevity. Avoid dry cleaning, follow manufacturer instructions, and watch for wear and tear. Your safety and comfort depend on it.
For more information Wearable Electric Blankets, Warm Feet, please get in touch with us!