Features:
1. The application force has no concentrated point, the stress is uniform, and it has a good protective effect on the optical cable.
2. Under the premise of not exceeding the lateral compression strength of the optical cable, it has a greater grip on the optical cable and can withstand greater tension.
3. The grip strength of the optical cable is not lower than the cable-level limit resistance, such as the tensile strength (uts) of 95, which is fully suitable for the needs of optical cable erection.
Strength: According to customer needs, the configured strength is 70KN, 80KN, 100KN, 120KN, etc. Weight: 4.2KG
Dimensions: 1650MM
Material: Aluminum Clad Steel
Category: For OPGW
Product composition diagram
Product technical specification sheet:
Sn
Model No.
Cable range
1
ONY 0780
7.2-7.8
2
ONY 0880
7.9-8.8
3
ONY 1010
8.9-10.1
4
ONY 1140
10.2-11.4
5
ONY 1280
11.5-12.8
6
ONY 1410
12.9-14.1
7
ONY 1550
14.2-15.5
8
ONY 1730
15.6-17.3
9
ONY 1920
17.4-19.2
10
ONY 2110
19.3-21.1
Conditions of Use: Used for the connection of terminal towers, tensile towers, towers with large height differences, towers with a rotation angle (elevation angle)> 25, and connecting towers.
Installation steps:
1. Align the installation mark of the outer wire with the optical cable and mark the installation.
2. Align the first set of inner wire marks with the optical cable marks.
3. The third group does the same as the second group.
4. All the inner wires are installed.
5. Align the outer wire installation mark with the inner wire installation mark.
6. Wrap one leg first.
7. Wind the other leg again.
8. Wrap the end of the outer wire well.
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of opgw hardware fittings.