UHMWPE (ultra high molecular weight polyethylene) is a premium virgin grade polyethylene which is used extensively in commercial and industrial applications.
It has a molecular weight of 4,500,000g/mol, and has improved wear and abrasion resistance, combined with outstanding impact strength, even at temperatures below -200°C.
UHMWPE has excellent chemical resistance, low moisture absorption, a low co-efficient of friction and superior anti-stick properties. It is frequently used in high-wear applications, from wear strips under conveyors to guide rails in bottling plants or scraper blades on road rollers.
Extruded profiles and wear strips have applications in the materials handling industry.
Larger UHMWPE sheets are used for lining bulk storage hoppers where low friction, anti-stick and abrasionresistant properties solve feed and wear problems. Sheets are available with planed or unplaned surfaces.
Tolerances: Thickness +/- 10%. Length and width +/- 1/4". When we buy 48" X 96" sheets from the manufacturer, they give us a tolerance of +/- 1/4" on length and width. We also use a 3/16" thick blade to cut heavy materials, which reduces the finished size of your sheet. Sheets under 48" X 96" will likely be under, not over. We will be happy to quote a price for sheets that you require to be at or over the specified size.
The excellent abrasion and chemical resistance in addition to the ability to absorb noise makes it ideal for applications such as:
&#; star wheels and corner guides
&#; chain and belt guides
&#; idler sprockets
&#; guide rails and rollers
&#; bin and mixer linings UHMW is a highly versatile polymer.
UHMW:
&#; low coefficient of friction
&#; excellent abrasion resistance
&#; high-impact strength
(will not break or shatter)
&#; chemical resistance
&#; FDA and USDA accepted
&#; broad temperature range
&#; little or no moisture absorption
&#; noise resistance
&#; easy to machine Moving and conveying materials
presents engineers with the
challenge of finding a solution to
abrasion and sticking problems.
UHMW is the answer in
applications such as:
&#; drag flights and paddles
&#; truck bedliners
&#; side rails and skirtboards
&#; dragline bucket liners UHMW
performs with
remarkably low
friction in the
packaging industry
A polymer that is self-lubricating,
non-marking and very easily
machined while continuing to
exhibit its exceptional abrasion resistance
makes it extremely attractive in applications such as:
&#; bushings and bearings
&#; timing screws
&#; drive sprockets
&#; bumper and sorter push blocks
&#; wear strips and plates UHMW resists
abrasion in the
conveying industry
Today&#;s high speed conveyors
demand surfaces with a low
coefficient of friction combined
with excellent impact and abrasion resistance.
UHMW is ideal for the following applications:
&#; straight and curved tracks
&#; wear strips and guide rails
&#; rollers and roller sleeves
&#; gears and sprockets
&#; pillow blocks
Custom Cut Information:
We now custom cut at a small additional charge, $1.00 per piece. Here's how to get it done:
1). Choose the stock size that is larger than the size you need and enter the quantity. Click "add to cart"
2). In the text box BELOW the item on the checkout page, write the size that you would like it cut to. Specify the size in whole and fractional INCHES. Example: 23 X 16-1/4. No need to put inch marks ("). We will consider all figures to be inches-DO NOT SPECIFY IN FEET. Do not put any other information in the text box, only the size.
3). Checkout, or continue shopping. Thats it! We will custom cut it to your specified size, we keep any cutoff pieces.
Please Note:
A). We will not cut a piece into many smaller pieces, we will only reduce it to one size. We keep any cutoffs. We cannot do shapes other than a square or rectangle.
B.) Except as noted above, cutting tolerance is +/- 1/16". This means that your piece may be over or under your requested size by 1/16". Note that the initial tolerance of the piece we begin with is +/- 1/4", which may affect your requested size. As an example, say you wanted our 1/4 X 24 X 24 custom cut to 24 X 19. Since the piece we start with is already 1/4" undersize due to the initial tolerance, we are cutting from a piece that is actually 23-3/4 X 23-3/4. Therefore, the piece we send you will be actually 23-3/4 X 19. If it had to be exactly 24, you would have to order a larger size. We cannot accept returns because you failed to recognize this, so please be sure!
C). Edges are sawcut. We do not finish edges. Because of tolerance and thickness variations, do not expect all pieces to fit together properly if you are building a box, aquarium, etc. Finish sizing is up to you.
D). If you are ordering MANY of the same item and only want SOME of them custom cut, enter them separately. For example, if you want 5 pieces 24 X 24 but only need 2 of them custom cut, place '2' in the quantity box, add it to your cart, then specify the custom size. Then go back to that page and put '3' in the quantity box and add it to your cart.
E). Cutting charges will be added.
Goto ABOSN to know more.
Abosn ( Dezhou) New Material Co., Ltd (www.abosnplastic.com), is the branch company of Xinxing Group, which has the biggest factory among Xinxing factories, it covers an area of 700,000.00 square feet, with an annual output of 50,000.00 tons of UHMWPE products.
UHMWPE sheets are 50% percent of the sales of the volume of our whole products, because of its extremely advantage of the property and wide application. Let us see one by one :
1. Chemical resistant UHMWPE dump truck liner durable chute liner (https://www.abosnplastics.com/uhmwpe-wear-resisting-liners/ )
2. UV-resistant UHMWPE marine fender pads dock bumpers for marine wall and harbor side protection pads ( https://www.abosnplastics.com/uhmwpe-marine-fender-pads/ )
3. high wear resistance UHMWPE HDPE plastic strip bar, chain guides
Our UHMW-PE pressing mould standard sizes:
1.Thickness: 6 - 300mm
2. Width: max mm
3. Normal standard size:
**(10-300)mm;
**(10-300)mm;
**(10-300)mm;
**(10-300)mm;
**(10-300)mm;
uhmwpe dewatering suction box
If your project needs this kind of property sheet, no hesitate to contact us.
The NSX bumper is prone to damage from impacts with driveways and speed bumps. The ScienceofSpeed UHMW Bumper Guard Kit protects the front bumper from damage by installing slippery impact-resistant plastic panels under the bumper.
The bumper guards were developed by 3D-scanning the factory bumper for precise fitment. Ulta high molecular weight (UHMW) black plastic is CNC machined with countersunk holes for fasteners and a chamfered edge.
The set includes a unique fastening method which makes installation a snap! The kit includes a set of top and bottom panels. The street-facing bottom panels fasten to the top panels with supplied clip nuts and fasteners. Once the hole pattern is drilled using the supplied panels as a template - the bottom panels are slipped on top of the bumper and the panel pairs sandwich together. This design means that there is no need to remove the bumper - installation can be accomplished with the bumper on the car.
Contact us to discuss your requirements of uhmwpe bumper. Our experienced sales team can help you identify the options that best suit your needs.