Floor marking tape is a vital and versatile tool in many workplaces. It promotes safe navigation by directing traffic and identifying areas, objects, and hazards.
Please visit our website for more information on this topic.
Floor tape comes in a variety of colors, styles, and materials, each with their own ideal application. Tapes can be reflective or non-reflective, and they can provide grip support to stabilize pedestrians, or a smooth surface to facilitate equipment traffic.
With so much diversity, it&#;s easy to see why it can be overwhelming finding the perfect tape for you &#; much less installing it. Therefore, we thought it could be helpful to have guidance in ensuring that your tape is properly installed.
Regulations require that permanent aisles and passageways must be marked. Floor tape is a simple yet versatile product for marking vehicle lanes, safe pedestrian passage, and much more.
It&#;s easy to install, remove, and reuse, and it serves an abundance of diverse purposes. This guide provides tips and best practices for ensuring you get the most out of your tape.
To maximize longevity and optimize performance, there are a few care-taking tips that we recommend. These include preparing your space, choosing supplementary products wisely, and staying mindful of common issues.
As with any paint or tape installation, it&#;s crucial that your floor be absolutely clean and dry prior to starting installation. Dust and debris can inhibit binding and result in suboptimal grip.
The chlorine in many floor cleaning liquids tends to leave a haze on the floor, even after rinsing. This haze can make it difficult for any adhesive to stick effectively. Simple Green and Greased Lightning are examples of non-chlorine cleaners.
If you must use a degreaser on your floor, ensure that you remove the degreaser thoroughly prior to applying any heavy duty floor tape.
Corners that touch may shrink away and leave a gap after initial installation. Adding a small amount of Loctite Super Glue, or an equivalent, under the tape at the corners can keep joints tight.
Driving something heavy, such as a forklift, over the entire line is a good method to ensure your heavy duty marking tape has been properly applied.
Additionally, this removes any air pockets that may be stuck beneath your floor tape.
In high-traffic areas, pallets, skids, and other heavy objects tend to scrape on the ground. Applying heavy duty floor dots or heavy duty floor tape to create a dotted line has proven to be an effective solution.
For a quick, professional-looking repair, lay a new piece of tape over the damaged area.
Then, cut through both the new and the old tape at each end of the damaged area, and peel out the old tape to apply the new for a perfect fit.
Corners are easily and accurately mitered by overlapping two layers of floor tape at the corner, allowing several extra inches of product beyond the corner as shown.
Leave the backing on the last foot of the bottom layer, and remove the backing from the first foot of the top layer. Affix the top layer to the bottom layer at the desired angle.
Cut both layers together from the inside corner to the outside corner, discard excess pieces and press mitered corner to the floor. You can use a sharp utility blade with a straight edge to cut the miter.
Aisle width varies depending on how the aisle is utilized in the workplace. Aisles used for forklift trucks, or other mechanical equipment, will certainly be wider than aisles for pedestrian traffic.
OSHA recommends that aisles be at least 3 feet wider than the largest equipment to be utilized (or a minimum of 4 feet).
Storage room aisles containing flammable and combustible liquids should be at least 3 feet wide, and emergency exits should have a minimum width of 28 inches.
The recommended width of aisle marking tape varies from 2 inches to 6 inches &#; therefore, any width of 2 inches or more is acceptable. Tape that is 4 inches wide tends to be the most popular as it&#;s a highly visible, strong, cost effective option.
OSHA and ANSI Z535.2 Safety Color Code designate yellow as the caution color. Therefore, a common method for marking is to use yellow stripes for marking physical dangers, such as stumbling, falling, or tripping hazards.
For more information on floor tape color standards, see:
At ifloortape.com, we have the expertise, experience, and product catalog to ensure that you can maximize productivity in your workplace. We even offer custom colors and sizes!
If you want more tips for properly installing your heavy duty floor marking tape, then
reach out to our team today.
Link to Hebei Top Tape
Understanding PermaStripe Tape
PermaStripe tape is a top-quality floor marking tape designed to endure rigorous conditions. Made from durable materials, such as a tough PVC backing and a strong adhesive layer, it ensures reliable adhesion to various surfaces. Unlike traditional marking methods like floor paint, PermaStripe tape offers numerous advantages. Its easy installation process saves time and effort, while its superior longevity ensures long-lasting floor markings. Whether you need to mark pedestrian walkways, storage areas, or hazardous zones, PermaStripe tape provides a reliable solution.
Preparing for PermaStripe Application
Before applying PermaStripe tape, it&#;s crucial to prepare your work area properly. Evaluate the floor surface and identify the areas that require floor markings. Ensure that the surface is clean, free from debris, and well-prepared for optimal adhesion. Cleaning supplies, such as brooms, vacuums, or degreasers, can help you remove dirt, dust, and grease. Gathering measuring tools, such as a tape measure or ruler, will aid in creating precise guidelines for installation. By preparing your workspace adequately, you&#;ll ensure a smooth and successful application of this heavy-duty floor marking tape.
Step-by-Step Guide to Applying PermaStripe Tape
Surface Preparation: To guarantee a strong bond between the PermaStripe tape and the floor, start by thoroughly cleaning the surface. Remove any dirt, dust, grease, or other contaminants using appropriate cleaning methods. For heavily soiled areas, consider using a degreaser or industrial cleaner. Once the surface is clean, ensure it is dry and free from moisture, as any moisture can compromise the adhesive&#;s effectiveness. Taking the time to inspect the floor for any uneven or damaged areas and addressing them before application is essential to ensure a smooth and long-lasting result.
Measuring and Planning
Precise measurements and planning are key to achieving a professional look with your floor markings. Measure the areas where you intend to apply the PermaStripe tape and determine the appropriate dimensions for each marking. Using a tape measure, mark the desired lines or shapes lightly with a pencil or chalk. Take into account safety regulations and guidelines, such as those governing pedestrian walkways or hazardous areas, to ensure compliance. This meticulous planning will ensure that your floor markings serve their purpose effectively.
Application Techniques
An alternate method if you wish to apply your floor marking tape without our floor marking application. Start the application process by carefully peeling off the backing of the PermaStripe tape, exposing the adhesive side. Begin at one end of the marked guideline and apply the tape smoothly and evenly along the desired path. To avoid air bubbles, apply the tape with light pressure, gradually smoothing it down as you progress. Consider using a hand roller or a soft cloth to ensure optimal adhesion. If you need to apply multiple strips of tape, overlap them slightly to create a seamless and professional appearance. This step-by-step application technique will result in clean and durable floor markings. We also offer a floor marking applicator that does the whole application for you seamlessly with minimum effort. Our floor marking applicator can be rented or purchased, if you wish to discuss further, please contact us.
Corners, Junctions, and Obstacles
When it comes to corners, junctions, or obstacles like machinery, columns, or doorways, special attention is required to maintain the integrity of your floor markings. For corners, you can choose to overlap the tape or create mitred corners, depending on your aesthetic preferences. Overlapping the tape ensures a continuous line, while mitred corners provide a more polished look. When encountering obstacles, carefully cut and shape the tape to fit around them while maintaining a smooth and unbroken line. By paying attention to these details, you&#;ll achieve a professional and visually appealing result. For the perfect result, we offer various shapes and sizes of our PermaFamily such as 90 degree corners, 45 degree corners and T junctions. View our full range of shapes and sizes to ensure your floor marking tape is applied correctly.
Maintenance and Longevity
To ensure the longevity and effectiveness of your PermaStripe tape floor markings, regular maintenance is essential. Clean the marked areas regularly to remove any dirt, spills, or debris that may accumulate over time. Use non-abrasive cleaning methods and avoid harsh chemicals that could damage the tape. Inspect the floor markings periodically and address any signs of wear or damage promptly. If necessary, replace the tape to maintain safety standards and the overall appearance of your workspace. Proper maintenance will ensure that your floor markings remain clear, vibrant, and serve their intended purpose for an extended period.
Applications and Benefits of PermaStripe Tape
PermaStripe tape finds extensive applications in various industries and environments. In warehouses and industrial settings, it serves as a reliable tool for traffic management, organisation, and the demarcation of designated zones. The vibrant colours and clear markings of PermaStripe tape contribute to improved safety and efficiency in these environments. Additionally, PermaStripe tape plays a significant role in health and safety compliance within manufacturing, assembly, and storage areas, helping to prevent accidents and streamline operations. Its ease of installation and durability make it an ideal choice for logistics, supply chain operations, and the implementation of 5S lean management practices. Moreover, PermaStripe tape finds applications in sports facilities, schools, and public spaces, providing clear visual indicators and creating designated areas for different activities.
Comparing PermaStripe Tape to Other Floor Marking Methods
When choosing a floor marking solution, it&#;s essential to consider the alternatives to PermaStripe tape. Traditional floor paint offers cost-effectiveness but can be more time-consuming for application and requires additional drying time. Adhesive vinyl and floor decals provide more flexibility in design but may lack the durability and longevity of PermaStripe tape. Epoxy floor coatings offer excellent resistance but often require professional installation and can be more expensive and time-consuming compared to tape application. Considering your specific needs and the advantages of PermaStripe tape, you can make an informed decision that suits your workspace requirements.
PermaStripe tape is an exceptional heavy-duty floor marking tape that combines durability, versatility, and ease of application. By following the detailed step-by-step guide provided in this comprehensive blog, you now have the knowledge and tools to transform your workspace into a well-organised and safe environment. With its long-lasting performance and resistance to heavy traffic and industrial conditions, PermaStripe tape is an invaluable tool for optimising your workspace, enhancing productivity, and promoting safety. Whether you need to mark pedestrian walkways, hazardous areas, or storage zones, PermaStripe tape offers a reliable solution that ensures clear and durable floor markings.
Interested in implementing a floor marking system?
Please visit the contact us form and one of our members of staff will get back to you.
Want to stay up to date?
Sign up to our newsletter to get industry insights.
Want more information on PVC Floor Marking Tape? Feel free to contact us.