Electrogalvanized & Zinc Coated Steel Sheets & Coil

Electrogalvanized Steel Sheets

Obtain corrosion resistance with a consistent thickness using electrogalvanized steel sheet and coil products from Alliance Steel.

Electrogalvanized steel is carbon steel with a corrosion-resistant zinc coating applied to one or both of its sides by electro-deposition. The continuous electrolytic coating process covers the steel surface with an exceptionally uniform thickness, which can enhance forming and joining operations.

Alliance Steel’s electrogalvanized steel sheet and coil service capabilities include slitting, shearing, blanking, degreasing and brushing, stretcher leveling, and metallurgical support.

Applications for Electrogalvanized Steel Products

Electrogalvanized steel has a smooth matte appearance, similar to cold rolled steel. The product is a strong choice for applications that require a high finish after painting such as:

• Automotive
• Agriculture
• Appliance
• Energy

Alliance Steel In-House Capabilities 

Alliance Steel maintains a large inventory of Electrogalvanized Steel sheet and coil products ranging in thickness. In addition, our equipment enables us to provide all your Electrogalvanized & Zinc Coated Steel process needs. Here are our in-house capabilities for:

 

Alliance Steel

Multi-Blanking

Capabilities:

Material Thickness:  .015"-.135 Max Coil:  

45,000 lbs.

ID:   

20”-24”

Entry Width:  

15.00”-74.00”

Exit Width:  

5.00”-74.00”

Length:  

6.00”-144”

Width/Length Tolerance:  

+/-.010"

Max Coil Weight:  

50,000 lbs.

Alliance Steel

Slitting

Capabilities:

Material Thickness:

.010"-.500"

Min/Max Slit Width:

.375”-84”

Min/Max ID:

20”-30”

Max OD:

84"

Slit Width Tolerance:

+/-.005"

 

Contact Alliance Steel for Electrogalvanized & Zinc Coated steel sheet and coil product information and availability.

 

Electrogalvanized Steel Grades & Properties

Structural Grades C Mn P S Al Si Cu Ni Cr Mo V Cb Ti N 30,33,36,40 0.25 0.9 0.035 0.04 0.2 0.2 0.15 0.06 0.008 0.008 0.025 36T2,45-80 0.25 1.35 0.035 0.04 0.2 0.2 0.15 0.06 0.008 0.008 0.025 45T2 .02- 0.08 .30- 1.0 .03- .07 0.025 .02- .08 0.6 0.2 0.2 0.15 0.06 0.008 0.008 0.025 .01- .03

HSLA Grades C Mn P S Al Si Cu Ni Cr Mo V Cb Ti N 45C1 0.22 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 45C2 0.15 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 50C1 0.23 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 50C2 & 55C2 0.15 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 55C1 0.25 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 60C1 & 65C1 0.26 1.5 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 60C2 & 65C2 0.15 1.5 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 70C1 0.26 1.65 0.04 0.04 0.2 0.2 0.15 0.16 0.005 0.005 0.005 70C2 0.15 1.65 0.04 0.04 0.2 0.2 0.15 0.16 0.005 0.005 0.005

Common Grades C Mn P S Al Si Cu Ni Cr Mo V Cb Ti N CSA 0.1 0.6 0.03 0.035 0.2 0.2 0.15 0.06 0.008 0.008 0.025 CSB 0.02-.15 0.6 0.03 0.035 0.2 0.2 0.15 0.06 0.008 0.008 0.025 CSC 0.08 0.6 0.1 0.035 0.2 0.2 0.15 0.06 0.008 0.008 0.025 BH 0.012 1.5 0.12 0.03 0.2 0.2 0.15 0.06 0.008 0.008 0.025 FSA 0.1 0.5 0.02 0.035 0.2 0.2 0.15 0.06 0.008 0.008 0.025 FSB 0.02-.15 0.5 0.02 0.03 0.2 0.2 0.15 0.06 0.008 0.008 0.025 DDS 0.06 0.5 0.02 0.025 .01 0.2 0.2 0.15 0.06 0.008 0.008 0.025 EDDS 0.02 0.4 0.02 0.02 .01* 0.2 0.2 0.15 0.06 0.1 0.1 0.15