The American Society of Mechanical Engineers /American National Standards Institute (ASME/ANSI) recognized the importance of reliable guidelines and were the first to create a set of performance standards for valves, flanges, and fittings in . The American Water Works Association determined the ANSI/ASME pressure ratings were too conservative when used with water.
You can find more information on our web, so please take a look.
Through testing, they determined Ductile Iron fittings with dimensions conforming to ANSI/ASME B16.1 Class 125 could be rated at 250 psi. The AWWA C110 applies to Ductile Iron and gray iron flanges and fittings ONLY. If you see a specification that calls out ANSI/ASME B16.1 then you better be careful.
Yes, AMSE B16.1 covers the class 250 flange, but this also covers the Class 125 flange, which has the same facing and drilling pattern as AWWA C110. This standard only refers to the Class 125 flange. The difference in Class 250 Flanges (sometimes referred to as EH-extra heavy) is:
Goto Solid to know more.
As these standards are designed for cold water service, their pressure ratings are higher than ASME/ANSI ratings for a fitting of similar size and material. These higher ratings are in place because ASME/ANSI fittings are expected to deal with more hazardous service situations such as steam! The Class 250 flange is an ANSI /ASME specification, not an AWWA, and it means the joint can withstand 250 psi at 373 degrees Fahrenheit. Incidentally, you will not find AWWA C110 grey iron fittings being made or sold routinely in the United States.
Our Vision, Our Mission, Our Values
Contact us to discuss your requirements of Ductile Iron Flange Adapter. Our experienced sales team can help you identify the options that best suit your needs.