Jul 24,
If you are looking for more details, kindly visit our website.
The connection of ductile iron pipes is flexible. The inner and outer diameters of pipes or fittings can be connected to each other regardless of their size, as long as their nominal diameters are the same, and the joints are interchangeable. For example, the steel pipe connection method, the joint of the steel pipe mostly presents the threaded joint, welding, in addition to the Lap Joint Flange and various flexible joint types,such us Flexible Flange Adaptor. In urban water supply projects, small-diameter indoor feedwater galvanized steel pipes generally use a threaded joint.
Cast iron pipes generally use a rigid joint and a flexible joint.
1. Rigid joint: linoleum asbestos cement joint, rubber ring expansion cement joint.
2, Flexible joint: apron asbestos cement joint.
3, Semi-rigid semi-flexible joint: hemp-lead joint.
Plastic pipe connection method for ductile iron pipe. The rigid PVC water supply pipe can be of rubber ring joint, bonding joint, flange connection and the like. The most commonly used rubber ring and adhesive connection, the bonding joint is only suitable for the connection of pipes with an outer diameter of less than 160mm; the flange connection is generally used for the connection of other PVC valve parts such as hard polyvinyl chloride pipe and cast iron pipe. The high density polyethylene plastic pipe can be connected by hot melt. The polyethylene pipe is connected to the metal pipe and connected by a steel-plastic transition joint.
The main components of ductile iron pipes are carbon, silicon, manganese, sulfur, phosphorus and magnesium. A certain amount of spheroidal graphite is distributed on the ferrite and pearlite matrix. The proportion of ferrite and pearlite in the matrix is different according to the nominal diameter and the elongation requirement. The proportion of pearlite in small diameter is small. Generally not more than 20%, the general control of large diameter is about 25%. Minimum tensile strength: 420/Mpa, minimum yield strength 300/Mpa, minimum elongation 7%.
If you are looking for more details, kindly visit MIDAS.
1. Flange connection: If it is directly buried in the ground, the risk of bolt corrosion is relatively high, and problems such as water leakage at the interface may occur in the future. Some design codes also require bolts not to be buried directly in the ground. In addition, because the flange connection uses bolts to ensure the sealing effect, manual operation has a greater impact.
2. Socket connection: The advantage of socket connection is that there is no risk of corrosion of bolts buried in the ground. But for large-diameter pipelines, the wall thickness of the steel pipe is thinner, and the steel pipe protrudes from the well chamber. The settlement of the well chamber may cause excessive radial deformation of the steel pipe, which may cause the risk of water leakage at the interface.
Ductile iron pipe fittings can be used in many places. Its function is not only water supply, but also natural gas supply. If natural gas is transported, its function is also very good. Through its functions, I can safely use natural gas and water resources. Ductile iron pipes are used for water supply, which to a certain extent guarantees the daily water consumption of citizens.
Qualified ductile iron pipe lining standard honest cement is required; the outer wall of the pipe is required to be sprayed with zinc, bituminous paint, and other epoxy paints are also available. Qualified ductile iron pipes can be used for more than one hundred years. The main rust area is where the outer wall is in contact with the soil. K9 Double Flange Straight Cast Iron Pipe&#;Wholesale of cast iron pipe fittings for water supply, due to its high humidity and high oxygen content.
Contact us to discuss your requirements of di pipe fittings. Our experienced sales team can help you identify the options that best suit your needs.