The guyline and tensioning systems normally found on backpacking shelters (including tents, tarps, and hammocks) share two flaws:
For more information, please visit our website.
As an alternative, I recommend the system that I will share here. It is simple and versatile, relies only on three easy-to-learn knots, and costs nothing.
Ive seen and experimented with many different systems. What characteristics and features have proven to be most critical?
Most shelters have at least some degree of flexibility in their pitch, in terms of shape, ridgeline angles, and/or height off the ground. This flexibility enables shelters to be optimized for:
Non-adjustable tensioning systems cannot take advantage of this flexibility. Hence, I use guylines (rather than just the stake-out loops) and I avoid fixed knots and fixed guyline lengths.
Finally, adjustability is especially important with shelters made of silicone-impregnated nylon, which has natural stretch, particularly when wet. With an adjustable guyline system, stretch-caused sagging can easily be eliminated.
In downpours, blizzards, and gusty storms or a combination thereof I must be confident that my guyline system will not fail. I have relied on this rigging system for nearly 500 nights and it has earned my trust: the line has never snapped, and the knots have never slipped or become untied. I teach this guyline system on my guided trips as well, and again no client has experienced failure.
When I must set up or break down my shelter in inclement weather or in cold temperatures (when exposed hands quickly lose dexterity), I appreciate having a fast guyline system.
Before I mastered this guyline system which took 20 minutes of practice I first relied on end-of-line fixed loops, which greatly impaired adjustability while also instigating knots, before transitioning to plastic line locks, tensioners, and cleats, which were convenient but imperfect. They:
My top pick for cordage is 1.5-mm Kelty Triptease LightLine. It best balances strength, weight, and user-friendliness and its reflectivity is a major plus when I need to re-find my shelter in the dark.
PMI Utility Cord is a more economical choice, but less strong and twice the weight as Triptease.
Gram weenies might be tempted to use pure spectra cord like Z-Line Dymeema Cord, which has unparalleled strength for its weight. But this is a stupid light choice: the cord is expensive, prone to knotting, and hard to work with (because its very thin and slippery).
I recommend aluminum Y- and V-shaped stakes, like the 7-inch Kungix Tent Stakes. They offer excellent holding power and can be pounded into the ground with a rock without bending.
I also own a few titanium Shepard hook skewer stakes, but reserve them for optional or non-critical stake-out points only. Their holding power and durability is limited even in ideal soils.
The exact number and lengths of cord depend on the specific shelter. In general, I avoid being stingy on the amount of cord I attach an extra foot or two weighs very little but it adds tremendous flexibility. My 3-season recommendations:
In the wintertime, longer guyline lengths are needed to tie-off to to deadman anchors, because the anchor is buried under about one foot of snow. For ground-level tie-outs on tents and mids, for example, I use 6-foot lengths.
To secure the tarp to an anchor point (e.g. stake or tree trunk) I prefer to use the McCarthy hitch, which is a simplified truckers hitch first showed to me by my friend Forrest McCarthy. If it has a real name, I dont know what it is.
Goto Tian Yilong to know more.
1. Attach the guyline to a stake-out loop using a bowline; other fixed loop knots would work too (e.g. the Figure 8) but the bowline consumes less cord and it creates a nice round loop. Unless you replace the guyline cord in the future and/or reconfigure your system, you will need to do this only once.
Cord attached to a tarps corner loop with a bowline.2. Run the guyline around the stake. The maximum distance between the shelter and the stake is a few inches less than half.
3. Run the guyline tip back to and through the bowline loop, then reverse its direction 180 degrees again back in the direction of the stake, thereby creating a 2:1 pulley. Tighten the guyline until the tarp is positioned and/or tensioned correctly.
Run the cord down to the stake, and then back towards the tarp and through the bowline loop.4. To secure the guyline, pinch the 2:1 pulley so that it cant slip, then tie it off with a slippery half hitch.
Tension the cord using the mechanical advantage, then tie if off with a slippery hitch.5. To undo the system in the morning, simply pull on the guyline tail in order to remove the slippery half hitch, then unthread the system. Dont forget your stake!
Tarp tied off to a nearby tree using the McCarthy hitch.The McCarthy hitch demands a lot of cord about twice the distance between the tarps stake-out loop and the stake so it is generally impractical for long guyline lengths, e.g. the ridgelines on an A-frame tarp. An alternative system is sometimes required too by the shorter guyline lengths, such as when a large rock is in the ideal stake position. In these instances, I use a truckers hitch with a slipped overhand loop.
Watch a good YouTube video of this knot.
1. Follow Step 1 from the McCarthy Hitch. Basically, tie the cord to the tarp with a bowline.
2. Run the guyline to the stake, then tie a slip loop into the cord between the tarp and the stake. This slip loop will serve the same function as the bowline loop in the McCarthy hitch.
Slip loop3. Run the guyline tip around the stake and up to the slip loop, then reverse its direction 180 degrees again back towards the stake, thereby creating a 2:1 pulley. Tighten the guyline until the tarp is positioned and/or tensioned correctly.
Once youve installed the slip loop, run the cord around the anchor/stake and back to the slip loop. By threading the cord through the slip loop, you can create a 2:1 mechanical advantage.4. To secure the guyline, pinch the 2:1 pulley so that it cant slip, then tie it off with a slipper half hitch.
Tie off the truckers hitch with a slippery hitch so that it can be easily undone in the morning. I dont tie off the knot more than this, but if you were really concerned you could add another slippery hitch.5. To undo the system in the morning, simply pull on the guyline tail in order to remove the slippery half hitch, then unthread the system. Dont forget your stake!
Disclosure. I strive to offer field-tested and trustworthy information, insights, and advice. I have no financial affiliations with or interests in any brands or products, and I do not publish sponsored content
This website is supported by affiliate marketing, whereby for referral traffic I receive a small commission from select vendors like Amazon or REI, at no cost to the reader. As an Amazon Associate I earn from qualifying purchases.
Details:
The Garden Stakes Pins U Shape in Silver Tone are a must-have for any gardening enthusiast. These galvanized landscape staples are designed with a U-shape and a pointed bottom, making them easy to nail into the ground. They are perfect for securing gardening fabric, edging, artificial turf, weed barriers, tarps, and more. These garden stakes are waterproof, windproof, and rustproof, ensuring their durability and long service life. To use them, simply fix the stake into the ground using a hammer or hard object. When it's time to remove them, use a hammer with a hook to pull them out. Please use caution when handling these garden stakes to protect your hands.
Features:
If you want to learn more, please visit our website u shaped ground stakes.