Before we begin, let’s understand a bit about your fishing pole. A telescopic pole is made up of several sections that collapse into one another for easy storage and transport. Sometimes, due to dirt, sand, or even moisture, these sections can get stuck, making it challenging to extend or collapse your fishing pole. But don’t fret; we’ve got you covered with these helpful tips:
Lack of grip on the smooth and round sections of the telescopic pole is one of the main reasons it gets stuck. Improving your grip on the pole increases your chances of pushing it together or pulling it apart.
One of the best ways to improve your grip is using duct or packing tape. Simply tear off two tape strips and fold them into loops with the sticky side out. Stick one loop to the palm of each hand or to the pole itself near the joint.
Now you can twist, pull, or push the sections with more force and less slippage. It’s one of the most practical ways to unstick a telescopic rod quickly.
If you don’t have any tape handy, using your knees is another proven way to unstick a telescopic pole. The method takes advantage of the leverage and strength of your legs. Legs are much stronger than your arms and can exert much more force.
Hold the pole horizontally behind your knees. Ensure your hands are close to the joint, and press them against your legs for stability. Then use your legs to push against your arms while twisting, pulling, or pushing the sections apart. The added force of the legs will help unstick the telescopic rod easily.
One common reason telescopic poles get stuck is the metal’s expansion due to temperature changes. In such a situation, cooling down the joint can help.
Use chilled water or ice to shrink a tight or swollen joint slightly. The metal will contract due to temperature reduction, making it easier to slide the joint out. However, be careful not to expose the pole to extreme temperatures for long, as this can damage or trigger rusting.
A rubber pad or rubber gloves can also help unstick a telescopic pole. They do the magic by adding extra friction and tension to the stuck joint.
First, wear rubber gloves or place the non-slip rubber pads on pole sections close to the stuck joint. Apply pressure, twist, and pull or push the sections apart. The rubber will provide the resistance needed to help unstuck the joint.
If none of the above methods work, you can use a hammer to tap on the joint gently from different angles to break it free. However, using a hammer should be the last resort, as it involves the risk of damaging the telescopic rod permanently.
One should exercise extreme caution while tapping the stuck joint with a hammer because some carelessness can permanently damage or dent the pole. You can try placing a plastic lid or a piece of wood between the hammer and the pole to protect it from direct impact.
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of Telescopic Pole System for sale.