In order to choose the best edge banding for your project, it is important to know what the material is made of and what its intended use will be. There are several common mistakes people make when choosing edge banding. Read this article to learn how to avoid these mistakes and ensure your project&#;s success. Learn the differences between PVC edging and ABS edge banding, as well as the differences between wood species. This article will give you the knowledge you need to choose the perfect edge banding for your project.
When selecting a color edge band, there are some mistakes you can avoid. First of all, make sure that you choose the right width and thickness. The edge banding should cover the least visible side of the material. In the case of rectangular plywood, for example, you can choose to apply edge banding on all four sides. In addition, you can also choose to use edge banding on the front surface to cover corner joints.
While most edge banding is black, there are some species that are not. Diospyros species are a good example of these species. They have distinctive color variations and are considered sustainable. European wood species are light and durable, while Asian woods are cheap and flexible. If you&#;re interested in purchasing edge banding for your furniture, consider some of these common wood species. Listed below are some of the most common.
Dalbergia sp. heartwood is a kaleidoscope of color and texture. Heartwood from the wood is salmon to orange-brown with irregular streaks. Both species are common in woodworking. The color of heartwood varies greatly between species. If you&#;re planning to use color edge banding on your table or other furniture, look for wood that matches your furniture and decor.
You&#;ll need to choose your wood species and color. Some common species are Burma padauk, Amboyna, and Pterocarpus indicus. Their heartwoods are light yellow, reddish-brown, and white. Pterocarpus soyauxii, also known as white Wenge, has a light yellow or reddish-brown heartwood with whitish markings.
Wood edge banding is available with glue or without glue. Wood edge banding with glue is easier to install, and you can use a clothes iron to apply it. Make sure you use moderate heat to avoid scorching the wood. Avoid using excessive heat as it may burn the wood. A low-heat iron is fine, but it&#;s crucial to apply glue at the correct temperature. After applying the glue, allow the glue to set before installing the banding.
If you want to add a unique finish to your new flooring, you can select common PVC colors for edge banding. These materials are available in many different colors and patterns, and can match the look of many flooring brands. Listed below are some of the more popular PVC colors and patterns. You can find edge banding that matches a variety of other flooring colors, including granite and marble. The possibilities are endless when choosing PVC.
One of the best features of PVC edge banding is its ease of installation. The most common sizes are 1mm, 2MM, and 3MM. The three most popular PVC edge banding thicknesses are these. Different types of edge banding will need different thicknesses, and you should check with your woodworking supplier to find out what is best suited for your project. If you are looking for a fast and modern solution, PVC edge banding is a good choice. However, this material will come with a few drawbacks.
A few common PVC color choices for edge banding are white and black. Both of these products are available in -foot rolls. If you&#;d prefer to use something other than white, you can also choose custom colors. In addition to standard colors, AVCO also offers custom color options and edgebanding for custom projects. They offer both hot melt and glueless adhesives and can be applied by hot air or glued.
For the most cost-effective and consistent edge banding on the market, Yodean Decor PVC edging is the best choice. PVC&#;s high-quality formula ensures a long service life for your milling tools. Its universal bonding agent makes it suitable for solvent-based and hot melt adhesives. It is available in different thicknesses and widths. It is easy to apply with edgebanding equipment and adhesives.
Yodean Decor ABS edgebanding is available in a variety of thicknesses and widths, making it a versatile option for all types of curved furniture. Its superior disposal properties make it a popular choice, often a required component of public or private tenders. With its extensive range of colors and finishes, the material is versatile and easy to work with. To help you choose the right type for your needs, you can use our Edgebanding Finder, which lets you specify the width, material, embossing, and board manufacturer.
ABS edging is an environmentally-friendly material and has a low environmental impact compared to other products. It is tough enough to be used in many commercial applications, but can be easily dismantled. ABS edge banding comes in a variety of colours and finishes, and you can easily find one that matches the design of your furniture. To find the right color for your project, contact a company expert today! You&#;ll be happy you did!
Many architects, designers, and manufacturers specify ABS edge banding because of its reliable properties and low maintenance. It is also a chlorine-free material that offers a high level of eco balance. ABS edge banding is especially relevant for furniture production and is widely used in the industry. Further, it is a highly durable material that is suited for various types of paints. Technical data sheets are available in our download area.
There are several common veneer colors. Red oak, Black Cherry, and Maple are the most popular wood grain types edge banding. These colors vary slightly, from pale wheat to pinkish tones. These colors are often referred to as gum pockets. These woods may also contain mineral patches. Pin knots are small knots that are typically less than 1/4&#; in diameter and do not contain a dark center. If you are looking for a specific color for your edge banding, you should consider red oak.
While many wood manufacturers now produce veneer edge banding, the downside is the cost. The material is not heat resistant and may not be durable enough for high-traffic areas. This is one of the reasons why solid wood is still the preferred material for edge banding. Its natural look matches nearly any piece of furniture. Solid wood is also easy to match and can be any tone or solid color. Solid wood edge banding is also highly durable and easy to repair. Additionally, it can be recycled. And the glue and tape used for edge banding are more stable and resistant to chipping and peeling.
If you&#;re not comfortable applying veneer, you can cut it yourself. You can also buy scrap plywood and cut it to length. Just ensure that you use the right size for the project. When trimming the veneer edge banding, be careful to avoid overlapping edges. A well-made edge banding will look much more professional than an ugly one. You can even make your own edge banding using scraps! This method is easier than you think!
If you are looking for edge banding for your furniture decorative project, you have come to the right place. Yodean Decor supplies edge banding in thousands of design, and covers solid, wood grain, gloss as well as matte edging, please don&#;t hesitate to contact us for more details.
When you&#;re choosing your residence hall furniture and deciding on the specs, you&#;ll inevitably choose what materials you want.
Should it be totally solid wood, including the top? Or should you get solid wood or plywood substrates with laminate tops, or all laminate?
Whatever the selection, your furniture is probably going to include edge banding. Why?
Because it&#;s an important part of the construction. And depending on where we use it in the cabinet, it improves the longevity of your furniture.
In this short guide&#;part of our Nuts & Bolts Series for operational and facilities leaders&#;you&#;ll learn some of the basics of edge banding.
So let&#;s start at the beginning. What is edge banding?
It&#;s actually kind of simple, and the video below will help you understand it even better, but this is a simple overview to get you started.
Here&#;s the basic non-technical idea.
Plywood, particle board, and other manufactured wood cores like MDF have rough, unfinished, unprotected, and generally unsightly edges.
To account for that, some clever folks developed technologies that allow you to glue different bands of glossy finished material to those rough edges to match the tops and sides.
Those narrow bands or strips are called edging tape, and they range in thickness from 0.018-inch to 5mm thick and come in 250 ft rolls.
The thicker edging is used in high traffic and commercial environments because it provides greater resilience and impact resistance. For example, the military requires a thicker &#;&#; solid wood edge banding for maximum impact resistance.
And edge banders are the industrial grade machines that apply the edging tape to the raw edges of the wood panels with a hot-melt adhesive or glue.
Edge banding serves both functional and aesthetic purposes.
Functionally, edge bands perform some key duties for your furniture. First, they keeps moisture out serving as de facto seals on the edge of the core material. Second, edge banding improves durability and resilience by providing impact resistance. If you&#;re using solid wood edging, it can also add to the overall strength of the furniture.
Aesthetically, edge banding covers up unsightly rough edges and creates a glossy finish to match your tops and sides. You can also create radial edges to soften sharp angles.
Where can you expect to find edge banding in your furniture? That depends on your overall material specification.
A solid wood product won&#;t include any edge banding, except where we can&#;t use solid wood. Wardrobe doors, for example, are made of veneer core plywood or MDF.
Link to Lituo
And even when we use solid wood for case sides and drawer fronts, many customers still use high pressure laminate tops. Those tops need edge banding.
If you&#;re using plywood or laminate as your material specification, that needs edge banding too.
DCI uses edge banding in places you might not expect, like plywood bed decks. Why? Because a fully sealed deck prevents bed bugs. You can read more about bed bug mitigation here.
DCI doesn&#;t use edge banding on cabinet backs or drawer bottoms because they are already embedded (sealed) in dato grooves. Likewise we don&#;t edge band internal plywood drawer parts because it doesn&#;t add value.
You should note that some manufactures don&#;t use edge banding where they should&#;like on the bottom and back edges of plywood cabinets. That&#;s a problem because moisture, even small amounts, can destroy unsealed furniture.
What are the edging tapes made from? There are different materials, and we&#;ll just focus on a few here.
1. PVC is the most popular material for edge banding on case good tops. Pros: It&#;s inexpensive, durable, and boasts a long life. It doesn&#;t require any finishing process. It&#;s also easy, albeit tedious, to repair. Cons: You can&#;t recycle it. It doesn&#;t biodegrade. Once it&#;s blemished, you can&#;t refinish it. (NB: ABS&#;Acrylonitrile Butadiene Styrene&#;is an eco-friendly alternative to PVC because it&#;s both recyclable and safe to incinerate.)
When it comes to PVC, we recommend 3mm edging in general because it goes on cleaner, quicker, and with better adhesion. Another advantage is that you get a graceful radius and a nice soft-looking finish. In general, we avoid .5mm edging because the corners tend to be too sharp.
2. Solid Wood is still a favorite for case good tops in many woodworking camps. It&#;s durable, recyclable, easy to fix and refinish, strong, stiff, and economical.
Benefits: it&#;s more resistant to chipping than veneer edge tape. Solid wood glues are more reliable and less prone to peeling than veneer and PVC. It provides additional dimensional support to plywood and mdf. Climate neutral manufacturing. Cons: Difficult to use for curves.
We offer solid wood edge banding for tops in a range of thicknesses. And you can apply it internally or externally.
When it comes to solid wood we recommend 9.5mm on case good tops.
As we explain below, at DCI, we believe the best way to apply wood edge banding is &#;internally&#; with a HPL top. Why? Because in our experience, it&#;s incredibly durable and never requires additional service.
3. Wood Veneer is the most common edge banding material for plywood cabinet sides, drawer fronts, and MDF wardrobe doors. It&#;s made from thin slices of wood&#;typically oak, maple, ash, walnut, birch, and mahogany&#;that are joined together in a roll using finger jointing.
It usually features a heat-sensitive glue backing. And it comes in a range of thicknesses, so it&#;s important to use the right one depending on the application.
Pros: It&#;s attractive, durable, and strong. It provides a clean solid-wood look, and it&#;s pre-sanded to absorb stains and finishes and seamlessly match your wood. Cons: It&#;s not heat resistant. Avoid putting it near a heater. It doesn&#;t do well in high-use environments.
According to RA Learning Center, there are at least four methods of applying edge banding. There are a lot of things to say about each of these but for now, here&#;s a simple list of application methods and mediums.
There&#;s no doubt, edge banding is essential to most campus and dorm furniture. When applied improperly, or used incorrectly in critical components, it&#;s a huge maintenance issue.
One issue you might find in furniture that has edge banding is that it peels. Why?
Sometimes, for different reasons, the adhesive can fail. When that happens, the edge banding will start to peel away from the edge.
Peeling can also happen because of rough use. For example, .5mm edging doesn&#;t provide much resistance to impact. Therefore you don&#;t want to use it on the front end of a case side. If you do, your edging might start to peel.
If your furniture starts to peel, we can fix it. Just reach out to your local DCI account rep, and we&#;ll take care of it for you.
Generally speaking, we recommend PVC edge banding for projects where budget is the first and driving priority. That is not to say there is anything wrong with this material. There are just fewer steps in the manufacturing process and the raw material is less expensive.
Solid wood edge banding is more expensive because it&#;s labor intensive and the material is higher quality. And with more steps involved in the manufacturing process, we consider this a premium solution. As we alluded to above, internal solid wood edge banding with HPL tops are probably our strongest and most durable solution.
We choose to use a hot melt glue for our adhesive solution because it&#;s user friendly and provides a great seal. We apply the glue to the edge while it&#;s still hot and then apply the banding, pressing it to the side.
Ambient temperature plays an important role in the edge banding process. We need to regulate the temperature of both the building and our materials. In essence, we need a warm environment for the optimal adhesion process. It can&#;t be cold in the building.
And finally, you need a good clean glue edge for the process to work. At DCI, we have state of the art machinery that improves the glue edge and squares it up perfectly.
It&#;s our responsibility to edge band correctly. But you should know, there are still choices you&#;ll need to make when evaluating edge banding options.
Those choices can feel daunting if you don&#;t live and breathe this stuff like we do. Our experts will help you navigate your edge banding options to ensure you get the right product for your project.
Our goal is to help you understand the process and give you confidence that our products are designed based on years of manufacturing experience and time-tested performance in the field.
Here is a stripped down version of edge banding. Of course, when building furniture for Higher Education and Military customers, we do this on an industrial scale. But this video will help you visualize the process in its simplest form.
If you enjoyed this article, you can check out the full Nuts & Bolts Series here.
If you are looking for more details, kindly visit pvc edge banding suppliers.