If you want to learn more, please visit our website.
1. Green and environmental protection: Does not contain harmful chlorofluoride in the atmosphere and meets the requirements of ISO international environmental protection certification, so it will not produce any harmful pollutants to the human body during installation and application.
2. Low thermal conductivity: Rubber and plastic is a high-quality thermal insulation and energy-saving material, which is a nemesis of cold insulation, anti-condensation, low thermal conductivity and stability, which can isolate any thermal medium.
3. Good fire performance: Rubber and plastic materials meet the national standard GB 'Analysis Method of Combustion Performance of Building Materials' After testing, it is judged to be GB B1 flame-resistant material.
4. Closed-bubble structure: Using Accurate Control Microcellular Foam technology, the closed-cell foaming rate is greatly improved, and the product's thermal conductivity is lower; the cells are also more uniform and dense, and have a strong resistance to water vapor penetration, extending Lifetime rubber and plastic are closed-bubble structure, water in the outside air is difficult to penetrate into the material, has excellent resistance to water vapor permeability, the outer surface of the cold insulation layer does not need to add a vapor barrier. The moisture resistance factor μ value of rubber and plastic is greater than (ISO) to form a built-in waterproof vapor layer, which does not affect the overall vapor barrier even if the product is scratched. Rubber and plastic are both a thermal insulation layer and a moisture-proof layer.
5. Thin material and space saving: The thickness of rubber and plastic is reduced by about two thirds compared with other insulation materials. Therefore, the space above the floor ceiling can be saved, and the indoor height can be improved.
6, long service life: rubber and plastic has excellent weather resistance, anti-aging, anti-cold, anti-heat, anti-drying, anti-humidity, also has UV resistance, ozone resistance, no aging, deformation, maintenance-free for twenty-five years Lifetime characteristics.
7, high-grade appearance, uniform and beautiful: Nine longitudinal rubber and plastic has a high elasticity, smooth surface, soft texture, even if installed on elbows, tees, valves and other irregular components can remain complete and beautiful, the appearance does not need to be decorated, Even without ceilings, high-grade properties can be maintained.
8. Easy and fast installation: Because the material is soft and no other auxiliary layer is needed, the construction and installation are simple. For the installation of the pipeline, it can be installed together with the progress of the pipeline installation, or the rubber and plastic pipes can be cut apart and then glued with special glue. It can be combined.
insulation board
One of the primary benefits of rubber testing is ensuring the safety and quality of products. By testing for factors such as processability, strength, and resistance to environmental factors, manufacturers can ensure that their products are produced as intended and do not pose a later risk to consumers. This is because variations in the raw materials and processing methods can have a knock-on effect on the performance of the final rubber product. If the material properties fall outside of specified ranges, the likelihood of underperformance and failure increases, potentially creating hazardous conditions for consumers.
With competitive price and timely delivery, Geyu Energy Saving sincerely hope to be your supplier and partner.
To maintain product safety, quality control processes are typically employed at every stage of the rubber manufacturing process. Starting with raw rubber, polymer or natural rubber, compounders mix rubber into technically specified blends that match the requirements of the application. Using statistical quality control methods, batches are continually monitored and measured against pre-determined limits and gates. Hardness, Mooney viscosity and natural rubber testing are commonly used together to build up a picture of the material properties of a rubber compound before vulcanisation.
Additional considerations include the material effects of the environmental conditions. Temperature, humidity and time in storage can all alter the base material properties of polymer compounds, including synthetic rubber. To account for this, a rubber sample can be artificially aged using an environmental chamber to simulate changes in temperature and humidity. Together, rubber testing for quality control can help prevent product recalls and legal issues, as well as build trust and loyalty among consumers who know they can rely on the quality and safety of the products they purchase.
Two example products that have benefitted greatly from rubber testing are passenger tyres and medical gloves. Consumers rely on these products to be high-quality and meet high safety standards. In these cases, the risk to consumers due to poor product safety could result in injury or loss of life.
If you want to learn more, please visit our website Rubber Plastic Material.