What are the advantages of cleaning and disinfection with foam? - Can-Hub

Supplies for cleaning and disinfection foam applications
To apply a Foam Cleaner or disinfectant, you can use several products: a Menno disinfection sprayer, a foam gun or a V1K mobile cleaning unit. The best choice of product depends on (the size of) the surface to be treated.

Cleaning and disinfection foam techniques
For the best quality cleaning and disinfection foam it is necessary that a number of requirements are met. The first step is to check and if necessary clean the tank. There should be no residual liquid from other products in the tank, as these can have an effect on the pH value. The water quality also influences the cleaning foam. Use rainwater or osmosis water. If this is not available, and other water (for example tap water) is used, check the pH value beforehand. This value should be ±pH 6, this can be achieved by acidifying (e.g. tap water) to a slightly more neutral pH. This saves on your product consumption. The lower the EC (salt content) the better the foam cleaner. For the foam gun, a pump pressure of 30-45 bar is recommended. No foaming agent needs to be added, the products Menno Ter Forte, Hortiseptclean PLUS, Menno Florades is by itself foaming at a sufficiently high concentration. For Mennno Florades, the activity is guaranteed at a pH of 3.5 - 4. If the pH is increased by contamination, you can easily add extra Menno Florades until a new pH value of 3.5-4 is reached.